ESD-9950
Analogue Temperature Controller with digital indicator
- 4 Digits Display - J type Thermocouple Input or, K type Thermocouple Input or, R type Thermocouple Input or, S type Thermocouple Input or, 2 or 3-wire PT 100 Input (It must be determined in order) - ON/OFF or Time Proportional Operation - Adjustable Hysteresis Value with DIP Switch for ON/OFF Control - Adjustable Control Period with DIP Switch for ON/OFF Control - Adjustable Set Offset Value
Housing&Mounting : 96mm x 96mm x 100mm 1/4 DIN 43700 plastic housing, for panel mounting. Panel cut-out is 92x92mm
Protection Class : NEMA 4X (IP65 at front, IP20 at rear).
Weight : Approximately 0.30 Kg.
Environmental Ratings : Standard, indoor at an altitude of less than 2000 meters with none condensing humidity.
Storage/Operating Temperature : -40 C to +85 C / 0 C to +50 C
Storage/Operating Humidity : 90 % max. (None condensing)
Installation : Fixed installation
Overvoltage Category : II
Pollution Degree : II, office or workplace, none conductive pollution
Operating Conditions : Continuous
Supply Voltage and Power : 230V V (±15%) 50/60 Hz. 4VA, 115V V (±15%) 50/60 Hz. 4VA, 24V V (±15%) 50/60 Hz. 4VA
Temperature Sensor Inputs : TC, RTD
Thermocouple Input Types : J, K , R , S (IEC584.1)(ITS90)
Thermoresistance Input Type : PT-100. (IEC751)(ITS90)
Accuracy : 1% of full scale for Thermocouple and Thermoresistance
Cold Junction Compensation : Automatically ± 0.1°C/1°C.
Line Compensation : Maximum 10 W .
Sensor Break Protection : Upscale
Sampling Cycle : 3 samples per second
Resolution of Set Point : ± 0.2% of full scale
Accuracy of Set Point : ±1% of full scale
Control Forms : ON / OFF , Time Proportional
Relay Output : 5A@250V V (Electrical Life : 100.000 Operation (Full Load))
SSR Driver Output : Maximum 50mA, Maximum 18V Z
Display : 8 mm Green 4 digits LED indicator
Led Indicators : PWR (Green) , OUT (Red)
